Spear Transpower

The line of vacuum units for resin conveying, adjusts loading cycle stages automatically to eliminate mechanical stress on the polymer and reduce electricity consumption.
Central vacuum units are subject to constant operation, both when on duty and on stand-by. IT can start and stop as necessary without compromising the life expectancy and reliability of the blower/pump or the motor drive.
Resin conveyance puts the material under mechanical/physical stress. The consequence is production of powder. The adequate velocity of conveyance in the pipe is what can be achieved with it. Depending on distance, elevation and quantity of material to be conveyed, it can be set to provide adequate vacuum to perform the very initial phase of the loading cycle, when the material starts to move, the intermediate phase, when the material must fill up the vacuum receiver and the final phase, when the line must be purged. These phases require different vacuum levels in the line for different durations, depending on length, elevation and capacity.
 
 
Technical Data sheet
 
Model
S138A
S1720A
S2620A
S3750A
S5050A
S138D
S1720D
S2620D
Motor Type
CARBON BRUSH
 
Motor Power (KW)
0.9
1.5
2.2
3.7
5.5
1.9
1.5
2.2
Conveying Capacity (kg/hr)
150
300
550
900
1200
150
300
550
Power Supply
3 Ø , 230/400/460/575 V AC , 50/60 HZ
 
Auto Cleaning Function
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
STANDARD
STANDARD
STANDARD
Two Material
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
Weight
8
12
16
25
30
8
12
16

The S vacuum pumps, with a power ranging from 0.85 up to 16kW, cover a production range of up to 2500 kg/h and a transport distance of 100 m maximum.

The vacuum pumps can be equipped with the cartridge filter or particularly compact and efficient filtering systems . The SF filter combines the cyclonic effect with dust separation and are recommended in the case particularly dusty materials are conveyed.

• Excellent performance
• Fine Finishing
• Easy to access